restart with bananpi 2017/12, and the installation of mavproxy with debian
Loading the firmware and start it with computer, it's comes like a raspberrypi, I think it would need some config to expend the uSD... the image I used: 2016-07-13-raspbian-jessie-bpi-m1-m1p-r1.img it's a 3.4.112 kernel easiest way is to use the GUI interface, with pi configuration. so I expand the memory and then enable some interface like uart, IIC SPI. Also turn it to 950Mhz after boot up , check version: pi@bpi-iot-ros-ai:~ $ uname -a Linux bpi-iot-ros-ai 3.4.112-sun7i #2 SMP PREEMPT Sat May 28 20:25:03 CST 2016 armv7l GNU/Linux after reboot, I plan to install Mavproxy with this: http://ardupilot.github.io/MAVProxy/html/getting_started/download_and_installation.html first sudo su apt-get update apt-get upgrade sudo apt - get install python - dev python - opencv python - wxgtk3 . 0 python - pip python - matplotlib python - pygame python - lxml sudo apt-get libxml2-dev sudo pip install MAVProxy but comes with error of lackin...