ATC_TLSR_Paper for price tage with TLRS MCU 02

 Buying thing from china is always suprising.

I carefully selected TLRS chip one from Stellar-m3n@ and skyline pro-MN@

one suprise comes in : stllar-M@ the pcb has very different testing dots and it's marked HS_EL5102-0_V2-4 ...
searching on web, there is a site mentions this is a 

HS_EL5102-0

SKU: HS_EL5102-0_V2-4, HS_EL5102-0_v1-9-4


thw owner did a very detail search on Hanshow

from a chinese web site this is confirmed

汉朔墨水屏电子价签拆解（Hanshow Stellar-M） 

    [复制链接]
跳转到指定楼层
1#
 发表于 2020-6-6 06:31:39 | 只看该作者 回帖奖励
闲的无聊，某鱼上买了几个电子价签，是墨水屏的，到手迅速拆开让大家看看。
主要配置：
2.13寸黑白色EPD，HINK E0213A04；26pin fpc 焊接 ； 分辨率 250x122
mcu：msp430g2553 tssop 28pin
rf：A7106 qfn 20pin
spirom：25vq21b ； 256K flashrom
两个cr2450并联供电 号称能用5年

interesting, I found a TI doc talk about CC2650 and A7106 to talk to each other on private protocol.


CC2560 can also do BLE, ZigBee....is this implit that 7106 can also do BLE and Zigbee?

留言

張貼留言

這個網誌中的熱門文章

Meshtastic 03 adding GPS on TTGO lora32 V2

圖片
 I wish to add GPS on my running meshtastic client on TTGO lora32. I have a GPS module outputs with nema at 9600bps. In the config app, in the position sector, you  can find the redefine of PGS pins. I firstly use IO00 as GPS_RX_pin. But it does not work. I guess the web config use 0 as none-config default. Then I want to know what is the default pin for GPS in meshtastic for TTGO Lora 32, I use the 2.4.x firmware for V2.1-1.6. Checked the git, there is no default gps pin for this hardware, so I changed the gps to mcu pin to 34, leave other pins stuff as 0 and do the config .  And it works. there is a new flasher, which still has LILYGO T-Lora V2.1-1.6 as board selection, with latest 2.5.xx firmware maintain 34,0,0 setting is no longer working. after few try, I decided to set to 34/32/25, where 32/25 are free pin on my board. I also reference to  LILYGO Meshtastic T-Beam V1.2 ESP32 LoRaGPS WiFi , it has a gps on 34/12 with 34/12/0 the setting is still working
閱讀完整內容

AIS0. understanding AIS NMEA 0183: How it's coded

For my boat tracking system, I found out that using AIS format seems to be a good idea, at least I don't have to worry about how to present boat data, since there are already plenty things for do this on mobile phone or PC. Here is what I read: http://catb.org/gpsd/AIVDM.html Looking into AIS NMEA0183, it has much more application then I think. Such as MOB device, epir, aid to navigation device...etc, all are included. it use the first few char to indicate the function: Table 1. AIS talker IDs !AB NMEA 4.0 Base AIS station !AD MMEA 4.0 Dependent AIS Base Station !AI Mobile AIS station !AN NMEA 4.0 Aid to Navigation AIS station !AR NMEA 4.0 AIS Receiving Station !AS NMEA 4.0 Limited Base Station !AT NMEA 4.0 AIS Transmitting Station !AX NMEA 4.0 Repeater AIS station !BS Base AIS station (deprecated in NMEA 4.0) !SA NMEA 4.0 Physical Shore AIS Station It can also be used between device on boat for message communication, AIVDO The...
閱讀完整內容

GeoSetter how to add geotag on to pictures, and export to google earth as kmz

圖片
I use gps info of my cell phone when I take pictures, so that I can find where these pics were taken after a long voyage. I also wish to export these pics to google earth or google map, which can be kml or kmz. https://geosetter.de/en/download-en/ Geo setter is a very powerful one. Some times my phone was not able to add geotag info on the the picture, since it does not have location info at that time(indoor picture or gps was not available). Of course you can edit the pic, but geo sitter provide a better interface, you can pic a location on map and then assign the location to the photo that you selected. much easier than deal with coordinates. I notes the steps as following. After install geosetter, select the folder where you store your images. photos with a blue location dot means these pics contain geotag. select one pic with no blue dot, and go to top menu "map", select "show overview map"  a google map will show up with goe location of pictures...
閱讀完整內容